How to Pair Bose SoundLink Revolve+ Phone or Tablet

This guide will walk you through pairing your Bose SoundLink Resolve+ speaker to your Android or iOS smartphone or tablet.

1. Push the Power Button on the top to turn the speaker on.
   
2. Press and hold the Bluetooth button until the Bluetooth indicator blinks blue.
   

Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its manual. Check your Bluetooth accessory manual for the correct PIN or passkey.

Depending on what device (Smartphone or Tablet) and which generation you have, the menu theme and options might look slightly different on your screen. However, the steps should be similar to all Android devices and generations.

Using the Dropdown Menu

1. Swipe down from the top of the device screen if it's a phone or up from the bottom of the device screen if it's a tablet to access the menu.
2. Locate the Bluetooth icon.
   
3. Press and hold the Bluetooth icon.
4. Swipe the switch to your right to set the Bluetooth accessory in pairing/discovery mode.
5. A list of nearby devices and previously paired devices will be shown.
6. In the list of Available Devices, choose the Bluetooth accessory you wish to pair with.
   
7. If you are prompted for a passkey, put it in. If there is no passkey, then your Bluetooth accessory should be paired now.

Using Settings within the Android Menu

1. Locate and tap the Apps Menu.
   
2. Locate and tap the Settings icon.
   
3. Select the Bluetooth. You may need to select Connections first.
4. Swipe the switch to your right to set the Bluetooth accessory in pairing/discovery mode.
5. A list of nearby devices and previously paired devices will be shown.
6. In the list of Available Devices, choose the Bluetooth accessory you wish to pair with.
   
7. If you are prompted for a passkey, put it in. If there is no passkey, then your Bluetooth accessory should be paired now.

Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its information manual. Check your Bluetooth accessory documentation for the correct PIN or passkey.

From Any iOS Device (iPod, iPad, iPhone)

1. Open Settings
   
2. Then Bluetooth.
   
3. Set the Bluetooth accessory in pairing/discovery mode.
4. Wait for your iOS device to display the detected Bluetooth accessory.
   
5. Select the Bluetooth accessory to pair it with the iOS device.
   • If a PIN or passkey is required, you will be prompted to enter it.
   • If there is no passkey, your Bluetooth accessory should connect without issue.