Need help?

Chat with a Tech Pro or call us
at1-833-202-2695.

How to Use Sony RF995RK Wireless Headphones

Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path by rating it at the end.

This will guide you through the basic use of your Sony RF995RK Wireless Home Theater Headphones.
Sony RF995RK Headphones

? What would you like to do?

  1. Turn on or off the headset
  2. Adjust the volume
  3. Charge the headset
  4. Switch on or off the Clear Voice effect
  5. Replace earpads
  6. Change channel

We're here to help!

chat
Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

This will guide you through the basic use of your Sony RF995RK Wireless Home Theater Headphones.
Sony RF995RK Headphones

The Power switch is on the bottom back of the left ear cup, just underneath the little bump to guide your hand.

Diagram of power switch location

Visit https://www.sony.com/electronics/headband-headphones/mdr-rf995rk on your computer for more information about your headphones.

The volume slider is on the back of the right ear cup. There's a small tactile bump to indicate full volume.

Right cup with volume slider highlighted.

  1. Place the headset on the base stand, so the contacts meet at the top.
    Diagram of placing headset on charging stand
  2. Double-check your placement at the top, and make sure the red charging light turns on.
  3. Once the headset reaches a full charge, the red charging light will turn off.

Switch on or off the Voice switch on the very bottom of the right ear cup.

Bottom of ear cup with Voice Effect switch highlighted.

  1. Have your new ear pads ready.
  2. Carefully pull the ear pad out of the groove on the housing.
    Removing earcup.
  3. Make sure the new ear pad is vertical, and work the ear pad around the housing, back into the groove.

If your headset has interference, it can help to change the channel it uses.

  1. Change the channel on the base station.
    Headphone base station highlighting the channel switch.
  2. Press the auto tuning button on the bottom of the right ear cup.
    Wireless headphones highlighting the auto tuning button.