Special Offer: All students, parents, & educators get 50% off tech support for the entire school year. Select the Support - Annual plan and enter code “EdTech50” during checkout.

How to Set Up the YUNEEC SteadyGrip

Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.

Introduction

Your Yuneec Typhoon 4K comes with an optional Steadygrip handheld base. Carry around your powerful CGO3 camera with complete access and control over everything it can do.
Before You Begin:
  • You must have your drone ready to fly.
Yuneec logo

1 How to Set Up the Steadygrip

  1. Remove the battery cover.
    Diagram showing the removal of the battery cover
  2. Insert 8 AA batteries.
    Inserting the batteries
  3. Gently slide the top part of the CGO3 camera (that also attaches below the nose of the Q500 the TYPHOON) onto the mount below the front part of the SteadyGrip. A corresponding ‘click’ will be noticed once the CGO3 camera has securely been installed into the slide-in mount on the SteadyGrip. Carefully connect the CGO3’s power/control connector to the power/control port of the CGO SteadyGrip.
    Connecting the camera to the steadygrip
  4. Turn the Steadygrip on by using the power switch. It will initialize after 4-8 seconds of no movement or vibration.
    Power switch

We're here to help!

chat
Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

Your Yuneec Typhoon 4K comes with an optional Steadygrip handheld base. Carry around your powerful CGO3 camera with complete access and control over everything it can do.
Before You Begin:
  • You must have your drone ready to fly.
Yuneec logo
  1. Remove the battery cover.
    Diagram showing the removal of the battery cover
  2. Insert 8 AA batteries.
    Inserting the batteries
  3. Gently slide the top part of the CGO3 camera (that also attaches below the nose of the Q500 the TYPHOON) onto the mount below the front part of the SteadyGrip. A corresponding ‘click’ will be noticed once the CGO3 camera has securely been installed into the slide-in mount on the SteadyGrip. Carefully connect the CGO3’s power/control connector to the power/control port of the CGO SteadyGrip.
    Connecting the camera to the steadygrip
  4. Turn the Steadygrip on by using the power switch. It will initialize after 4-8 seconds of no movement or vibration.
    Power switch