How to Set Up Sony RF995RK Wireless Headphones

Introduction

This guide will walk you through the basic setup of your Sony RF995RK Wireless headphones.

Sony RF995RK

1 Connections and Power

Install Headphones Battery

  1. On the left earcup, push down, then pull out on the outer housing.
    Removing the battery cover from the earcup. Illustration.
  2. Insert the battery using the markings on the battery itself and battery compartment as your guide.
    Inserting the battery pack into the earcup. Illustration.
  3. Reseat the earcup.
    Reinstalling the battery cover to the earcup. Illustration.

Connect to Power

  1. Connect the power cable to the base, and the power outlet.
    Installing the power cable to the headphone base. Illustration.

Connect to Device

  1. Connect the base to either your television, or your music player, using either the headphone jack, or the or the mini-plug to RCA cable.
    Connecting the headphone base to your television. Illustration.
    Connecting the headphone base to your television. Illustration.
  2. If you are using this with your television, select the proper audio output. Refer to your television's user manual for more information on this feature.

2 Charge

  1. Place the headset on the base stand, so the contacts meet at the top.
    Diagram of placing headset on charging stand
  2. Double-check your placement at the top, and make sure the red charging light turns on.
  3. Once the headset reaches a full charge, the red charging light will turn off.

3 Basic Use

  • The Power switch is on the bottom back of the left ear cup, just underneath the little bump to guide your hand.
    Diagram of switching power on on left earcup
  • The volume slider is on the back of the right ear cup. There's a small tactile bump to indicate full volume.
    Diagram of volume slider on right earcup

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

This guide will walk you through the basic setup of your Sony RF995RK Wireless headphones.

Sony RF995RK

Install Headphones Battery

  1. On the left earcup, push down, then pull out on the outer housing.
    Removing the battery cover from the earcup. Illustration.
  2. Insert the battery using the markings on the battery itself and battery compartment as your guide.
    Inserting the battery pack into the earcup. Illustration.
  3. Reseat the earcup.
    Reinstalling the battery cover to the earcup. Illustration.

Connect to Power

  1. Connect the power cable to the base, and the power outlet.
    Installing the power cable to the headphone base. Illustration.

Connect to Device

  1. Connect the base to either your television, or your music player, using either the headphone jack, or the or the mini-plug to RCA cable.
    Connecting the headphone base to your television. Illustration.
    Connecting the headphone base to your television. Illustration.
  2. If you are using this with your television, select the proper audio output. Refer to your television's user manual for more information on this feature.
  1. Place the headset on the base stand, so the contacts meet at the top.
    Diagram of placing headset on charging stand
  2. Double-check your placement at the top, and make sure the red charging light turns on.
  3. Once the headset reaches a full charge, the red charging light will turn off.
  • The Power switch is on the bottom back of the left ear cup, just underneath the little bump to guide your hand.
    Diagram of switching power on on left earcup
  • The volume slider is on the back of the right ear cup. There's a small tactile bump to indicate full volume.
    Diagram of volume slider on right earcup
We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept