How to Set Up a LG BP-350 BluRay Player

Introduction

This guide will walk you though the basic setup of your LG BP-350 blu-ray player.

1 Connect Cables

  1. Plug the power cord into the Blu-Ray player and into a power source.
    Back of the Blu-Ray player and a wall outlet with an AC plug plugged into the wall and the back of the Blu-Ray player
  2. Plug the HDMI cable from the box to the TV.
    Back of Blu-Ray player showing HDNI port and TV with HDMI cable hooked to each

2 Insert Battery

Remove the cover off of the remote and insert a AAA battery. Be sure to match the positive (+) and negative (-) symbols.

Picture of remote and battery showing how to insert the battery into the remote

3 Initial Setup

Use the remote as needed in the following steps.
Remote Control

  1. Press the Power button.
  2. Use the arrows to select your language.
    Select a language with English highlighted
  3. After reading the terms of service, highlight Agree and press the Enter button.
  4. Highlight Start and press the Enter button.
    Network Settings page with Start button and Advanced setting
  5. Use the up and down arrows to highlight your wireless network and then press the Enter button.
    List of available networks with refresh list button and advanced setting button
  6. Use the arrows to enter your wireless security key. Once your security key is entered, highlight Ok and hit the Enter button.
    Enter your password with a box of characters to choose your password
  7. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
  8. Highlight OK and press the Enter button to finish setup.
    Network status with your network information displayed and an OK button
  9. Highlight Finish and hit the Enter button.
    Setup is complete showing your language and network setup with a Finish button

4 Set Resolution

Use the remote for the following steps.

Remote Control

  1. Press the Home button.
  2. Use the left and right arrows to highlight settings and press the Enter button.
    Home screen with settings selected
  3. Use the up and down arrows to select Display and press the right arrow button.
  4. Use the up and down arrows to highlight Resolution and press the Enter button.
    Settings menu with display selected and resolution highlighted
  5. Use the up and down arrows to highlight the resolution you want and then press the Enter button.
    Resolution selected with a box showing a list of different resolutions available

5 Connect Wi-Fi

Use the remote for the following steps.
Remote Control

  1. Press the Home button.
  2. Use the left and right arrows to highlight settings and press the Enter button.
    Settings Icon
  3. Press the Enter button when the Start button is highlighted.
    For wireless network please install router with a picture of a router and a start button
  4. Use the up and down arrows to highlight your wireless network and then press the Enter button.
    List of available networks
  5. Enter your wireless security key and then highlight Ok and then hit the Enter button.
    Please enter password with password field and a selection of characters to select
  6. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
    Set an IP address and DNS with IP mode and DNS server options and next button
  7. Highlight OK and press the Enter button to finish setup.
    Wireless Network with summary of selected choices and OK button

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

This guide will walk you though the basic setup of your LG BP-350 blu-ray player.
  1. Plug the power cord into the Blu-Ray player and into a power source.
    Back of the Blu-Ray player and a wall outlet with an AC plug plugged into the wall and the back of the Blu-Ray player
  2. Plug the HDMI cable from the box to the TV.
    Back of Blu-Ray player showing HDNI port and TV with HDMI cable hooked to each

Remove the cover off of the remote and insert a AAA battery. Be sure to match the positive (+) and negative (-) symbols.

Picture of remote and battery showing how to insert the battery into the remote

Use the remote as needed in the following steps.
Remote Control

  1. Press the Power button.
  2. Use the arrows to select your language.
    Select a language with English highlighted
  3. After reading the terms of service, highlight Agree and press the Enter button.
  4. Highlight Start and press the Enter button.
    Network Settings page with Start button and Advanced setting
  5. Use the up and down arrows to highlight your wireless network and then press the Enter button.
    List of available networks with refresh list button and advanced setting button
  6. Use the arrows to enter your wireless security key. Once your security key is entered, highlight Ok and hit the Enter button.
    Enter your password with a box of characters to choose your password
  7. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
  8. Highlight OK and press the Enter button to finish setup.
    Network status with your network information displayed and an OK button
  9. Highlight Finish and hit the Enter button.
    Setup is complete showing your language and network setup with a Finish button

Use the remote for the following steps.

Remote Control

  1. Press the Home button.
  2. Use the left and right arrows to highlight settings and press the Enter button.
    Home screen with settings selected
  3. Use the up and down arrows to select Display and press the right arrow button.
  4. Use the up and down arrows to highlight Resolution and press the Enter button.
    Settings menu with display selected and resolution highlighted
  5. Use the up and down arrows to highlight the resolution you want and then press the Enter button.
    Resolution selected with a box showing a list of different resolutions available

Use the remote for the following steps.
Remote Control

  1. Press the Home button.
  2. Use the left and right arrows to highlight settings and press the Enter button.
    Settings Icon
  3. Press the Enter button when the Start button is highlighted.
    For wireless network please install router with a picture of a router and a start button
  4. Use the up and down arrows to highlight your wireless network and then press the Enter button.
    List of available networks
  5. Enter your wireless security key and then highlight Ok and then hit the Enter button.
    Please enter password with password field and a selection of characters to select
  6. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
    Set an IP address and DNS with IP mode and DNS server options and next button
  7. Highlight OK and press the Enter button to finish setup.
    Wireless Network with summary of selected choices and OK button
We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept