How to Pair Bluetooth Devices to a Sony XB20 Speaker

1. Press and hold the Power/Bluetooth button until you hear beeps and the Bluetooth light flashes rapidly.
   
2. If you have a NFC enabled device you can place it next to the NFC logo and it will automatically pair with your device.
   

Depending on what device (Smartphone or Tablet) and which generation you have, the menu theme and options might look slightly different on your screen. However, the steps should be similar to all Android devices and generations.

From any Android Device

1. Open the App Drawer.
   
   

   Newer versions of Android's operating system may not have the app drawer button. If you do not see the button, you will simply swipe up from the bottom of your screen to get to your apps.

2. Go to Settings.
   
3. Tap Bluetooth. You may need to select Connections first.
   
4. Set the Bluetooth accessory in pairing/discovery mode.
   

   This process will vary depending on what kind of device you have. Refer to your device's documentation for specifics on how to accomplish this.

5. Ensure Bluetooth is On and then select your device from the list below.
   
   

   Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its manual. Check your Bluetooth accessory manual for the correct PIN or passkey.

Depending on what device (iPhone, iPad or iPod Touch) and which generation you have, the menu theme and options might look slightly different on your screen. However, the steps should be the same across all iOS devices and generations.

From any iOS Device:

1. Open Settings.
   
2. Tap Bluetooth.
   
3. Set the Bluetooth accessory in pairing/discovery mode.
   

   This process will vary depending on what kind of device you have. Refer to your device's documentation for specifics on how to accomplish this.

4. Ensure Bluetooth is On then select your device from the list below.
   

   Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its information manual. Check your Bluetooth accessory documentation for the correct PIN or passkey.

1. Set the Bluetooth accessory in pairing/discovery mode.
   

   This process will vary depending on what kind of device you have. Refer to your device's documentation for specifics on how to accomplish this.

2. Click the Start button.
   
3. Tap on Settings.
   
4. Then click on Devices.
   
5. Select Bluetooth & other devices from the left-hand column and ensure the Bluetooth switch is in the On position to the right.
   
6. Click Add Bluetooth or other device.
   
7. Select Bluetooth from the list.
   
8. Select the device you want to pair the system with.
   
9. If asked to enter or verify the passcode showing on the other device, do so.
   
10. Click on Done.
    
11. After the pairing was successful the device will show the Paired status under its name.
    

To Set Your Default Audio Playback Device

1. Right click on your speaker icon in the Notification Area and then click on Playback devices.
   
2. Click on your device you wish to set as the default audio device and click Set Default.
   
3. Click OK to save the changes.
   

1. Set your device to pairing mode. The way you do this may differ from device to device.
   

   In many cases, you can place your device in pairing mode by having the device off, then pressing and holding the power button to start it up. Usually, after a few moments, it will indicate it is in pairing mode (flashing its indicator light, for example), and you can release the power button.

2. On the menu bar, click the Apple menu, then System Preferences.
   
3. Select Bluetooth.
   
4. Ensure that it says Bluetooth: On. Turn it on with the button if it isn't.
   
5. Your computer will search for any Bluetooth devices in range.
6. Once your device is located, click Pair.
   
7. Once the pairing process is complete, your Mac will automatically connect to the device whenever it is in range.

1. Click on the speaker icon and click on Sound Preferences.
   
2. Click on the Input tab and then select the device you wish to be your default recording device.