How to Fix Control Issues FluxSmart WiFi Smart Light

Introduction

FluxSmart Logo.

1 Restart

To Reboot a Smart Bulb

  1. Turn off the main power, or unplug the lamp that your smart bulb is plugged into.
    Light switch turned off
  2. Wait 10 seconds.
    Wait 10 seconds
  3. Turn the power back on, or plug the lamp back in.
    Light switch on.
  4. Wait one minute for the smart bulb to reconnect to the network.
    Wait 60 Seconds

? Try testing your light in the Flux Wi-Fi Pro app.

  1. The bulb is responding normally now
  2. I still can not control the bulb

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

FluxSmart Logo.

To Reboot a Smart Bulb

  1. Turn off the main power, or unplug the lamp that your smart bulb is plugged into.
    Light switch turned off
  2. Wait 10 seconds.
    Wait 10 seconds
  3. Turn the power back on, or plug the lamp back in.
    Light switch on.
  4. Wait one minute for the smart bulb to reconnect to the network.
    Wait 60 Seconds

To continue, we need to know what Operating System your smartphone or tablet has.

There are 2 main Operating Systems for smartphones currently available, Android and iOS.

Android Smartphone
Android smartphones are produced by multiple companies, such as Samsung, LG, Motorola, Sony, Nokia, Lenovo, and HTC.Android Home Screen
iOS Smartphone
Apple is the only company that makes iOS smartphones.iOS Home Screen

The following steps will need to be completed 4 times. After the 4th time, the light will strobe for 20 seconds and then turn bright white.

  1. Power on the bulb and wait for it to turn on.
    White bulb on full
  2. Wait 3 seconds.
    Wait 3 Seconds
  3. Power off the bulb.
    Bulb off
  4. Repeat the above two steps 4 times.
  5. After strobing for 20 seconds, the bulb will turn bright white to indicate the reset is complete.
    White LED Light Reset
  6. The bulb will now show as LEDNetxxx in your phone's WiFi settings.
  7. Open the app and go through the setup process to pair the bulb to your home wireless network.

This process will need to be repeated for each FluxSmart Wi-Fi light you wish to set up.

  1. Tap the Plus + Symbol in the top right corner of the screen.
    +
  2. Tap Add Light.
    Add Light
  3. A list of unpaired FluxSmart lights will be displayed. Select the light you would like to add.
  4. You will then be prompted to select your Wi-Fi network from a list of nearby networks. Select your network and enter your Wi-Fi password if necessary.
  5. Enter a description for the light you've chosen to add, then tap Confirm.

    If you have multiple SmartFlux lights installed in your home, descriptions will make it easier to identify and manage your lights later on.

  6. The light should now be successfully added. Tap any light from the list in order to manage it.
    Installed devices that can be managed

    Additional lights can be added by repeating these steps.

The following steps will need to be completed 4 times. After the 4th time, the light will strobe for 20 seconds and then turn bright white.

  1. Power on the bulb and wait for it to turn on.
    White bulb on full
  2. Wait 3 seconds.
    Wait 3 Seconds
  3. Power off the bulb.
    Bulb off
  4. Repeat the above two steps 4 times.
  5. After strobing for 20 seconds, the bulb will turn bright white to indicate the reset is complete.
    White LED Light Reset
  6. The bulb will now show as LEDNetxxx in your phone's WiFi settings.
  7. Open the app and go through the setup process to pair the bulb to your home wireless network.

This process will need to be repeated for each FluxSmart Wi-Fi light you wish to set up.

  1. Tap the Plus + Symbol in the top right corner of the screen.
    +
  2. Then tap Connect light to Wi-Fi network.
    Connect light to Wi-Fi network
  3. Open Settings.
    iOS Settings.
  4. Select Wi-Fi.
    iOS Wi-Fi
  5. Select the Wi-Fi set up network from the list of available networks. It will be named either LEDnetxxx or FLUXnetxxx.
    LEDnetxxx or FLUXnetxxx network
    This set up network is unsecured; this is normal. You will be using it to set up the device only. After, you will be using the device over your secured wireless connection.
  6. Return to the Flux WiFi Pro app.
    Flux WiFi Pro
  7. Now that your device is connected to your bulb's set up network, you will be prompted to select your home's Wi-Fi network name from a list of available networks. Enter your Wi-Fi network password if necessary.

    Your light will begin connecting to your home's Wi-Fi network. Wait for the bulb to connect and restart. If the pairing was successful, you will be prompted to enter a description for the light that was just added.

  8. Enter a description for the light, then tap Confirm.

    If you have multiple SmartFlux lights installed in your home, descriptions will make it easier to identify and manage your lights later on.

  9. The light should now be successfully added. Tap any light from the list in order to manage it.
    List of installed bulbs that can be managed

    Additional lights can be added by repeating these steps.

We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept