How to Connect Samsung HT-J4500/ZA to Wired Network

1 Connect Device to Network - Wired

Ethernet Cable
Ethernet CableAn Ethernet cable can come in many colors and lengths. The end is larger than a phone cable; and has eight small contacts on the bottom, with a clip on the top to make sure it stays locked into the port.
Ethernet Port
Ethernet PortAn Ethernet port will be on the side or back of your device, and sometimes has lights on the left and right, used to show traffic and link conditions. It is larger than a phone jack.
  1. Acquire an Ethernet cable.
  2. Take one end of the cable and plug it into your router or modem Ethernet port.
    Plug in Ethernet cable to Ethernet port.
  3. Plug the other end of the cable into your devices Ethernet port.

2 Connect via Ethernet

  1. From the main screen go to Settings on the bottom right corner.
    Blu-ray menu with Settings option highlighted
  2. Then go down to Network.
    Blu-ray settings menu with network option highlighted
  3. And then left to Network Settings.
    Blu-ray network menu with settings highlighted
  4. Make sure the Network Type is set to Wired.
    Blu-ray network setup method selection screen
  5. Then select Connect.
    Blu-ray wired network setup initiation screen
  6. Once connected to the Internet, you will see a confirmation message on the screen.
    Blu-ray internet setup completion confirmation screen

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

Ethernet Cable
Ethernet CableAn Ethernet cable can come in many colors and lengths. The end is larger than a phone cable; and has eight small contacts on the bottom, with a clip on the top to make sure it stays locked into the port.
Ethernet Port
Ethernet PortAn Ethernet port will be on the side or back of your device, and sometimes has lights on the left and right, used to show traffic and link conditions. It is larger than a phone jack.
  1. Acquire an Ethernet cable.
  2. Take one end of the cable and plug it into your router or modem Ethernet port.
    Plug in Ethernet cable to Ethernet port.
  3. Plug the other end of the cable into your devices Ethernet port.
  1. From the main screen go to Settings on the bottom right corner.
    Blu-ray menu with Settings option highlighted
  2. Then go down to Network.
    Blu-ray settings menu with network option highlighted
  3. And then left to Network Settings.
    Blu-ray network menu with settings highlighted
  4. Make sure the Network Type is set to Wired.
    Blu-ray network setup method selection screen
  5. Then select Connect.
    Blu-ray wired network setup initiation screen
  6. Once connected to the Internet, you will see a confirmation message on the screen.
    Blu-ray internet setup completion confirmation screen
We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept