How to Connect Nintendo Switch to WiFi

Introduction

This guide will walk you through connecting your Nintendo Wii Switch to Wi-Fi.

1 Credentials

In order to connect to a wireless network, you must have the required credentials. These are:
  • Wireless Network Name (SSID)
  • Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers or gateways have a label with the default credentials. If the credentials aren't there, check the documentation that came with your device.
Default Wi-Fi credentials highlighted on router / gateway sticker.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

? Do you know your Wireless Network name (SSID) and Key?

  1. Yes
  2. No

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

This guide will walk you through connecting your Nintendo Wii Switch to Wi-Fi.
In order to connect to a wireless network, you must have the required credentials. These are:
  • Wireless Network Name (SSID)
  • Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers or gateways have a label with the default credentials. If the credentials aren't there, check the documentation that came with your device.
Default Wi-Fi credentials highlighted on router / gateway sticker.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

  1. From your homescreen, select System Settings ⛭.
    homescreen with system settings highlighted

  2. Select Internet > Internet Settings.
    system settings with internet selected and Internet Settings highlighted

  3. Your Nintendo Switch will search for your Wi-Fi network.
    Searching for networks

  4. Look under Networks Found, and select your network.
    Internet settings with a list of known networks and available networks with networks found highlighted

  5. Enter your Wi-Fi password.
    virtual keyboard with network key field and ok is highlighted

  6. Your Nintendo Switch will connect to your Wi-Fi network.
    screen indicating your connecting to the network

  7. Once connected, select OK.
    screen indicating a scuessful connection with ok highlighted
To help troubleshoot the problem we should check if other devices can connect to the wireless network.

If other wireless devices are connected to the network and functioning properly, chances are the router is OK. It's possible there is an environmental issue. Do you have a portable wireless device (Smart Phone, Tablet, Laptop, etc.) that you can put in the same area to test and see if that device's wireless connection still functions as intended in that location?

If you haven't already, please try power cycling the device you're working with.

  1. Turn off your device.
    Power
  2. Wait ten seconds.
    Wait 10 seconds
  3. Turn your device on again.
    Power

The following Protocols are not supported on the Nintendo Wii

  • WPA-PSK (TKIP)
  • WPA2- PSK (TKIP)

The device needs to be within a reasonable range of the router in order to connect and have the best connection speeds.

  • In general, in most homes, you can be up to 30 feet from your router for a decent connection.
  • From 30' to 50' away, the speeds will be slower, and may drop occasionally, but it should be usable.
  • Greater than 50' away, and the signal will most likely be too weak to overcome interference. The speeds will be slow, and the connection may be sporadic.

The above numbers are approximates only. Optimal range may vary based on router make and model.

Your router may need to be relocated to a more centralized location in order to provide better coverage for all your devices.

Good Placement

A house, separated into rooms detailing how placing Wi-Fi in the center of a house will provide better coverage to reach all devices. Diagram.

Bad Placement

A house, separated into rooms detailing how placing Wi-Fi in the corner of the house can cause some devices to not have a Wi-Fi signal. Diagram.

Since this appears to be a range issue that can be resolved by putting the router in closer proximity to the device's intended use area, we recommend moving the router to a more centralized location.
If the wireless signal is not reaching the device and moving the router or device in closer proximity is not possible or doesn't resolve the issue, the best option for wireless connectivity is to get a range extender.
We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept