How to Check Connection D-Link DAP1650 WiFi Repeater

Introduction

In This Guide
You'll Learn:
  • How to check the network status of your D-Link Range Extender.
You'll Need:
  • To be by your range extender or have a computer on hand.

1 Check Status

You can check the status of your D-Link DAP-1650 AC1200 Range Extender in one of two ways:

  • On the device itself,
  • On a computer.

The type and amount of network related information that you get depends on which method you use.

On Your Range Extender

  1. The indicator lights on the D-Link DAP-1650 AC1200 Wi-Fi range extender have the following meanings:

    D-Link DAP-1650 with indicator lights

    Power LED (1):

    Solid Green
    Solid green light.On and functioning properly.
    Blinking Green
    Blinking green light.WPS has been pushed and searching for signal.
    Solid Orange
    Solid orange light.Device is booting up.
    Blinking Orange
    Blinking orange light.Device is in recovery mode.

    Internet LED (2):

    Solid Green
    Solid green light.Successfully connected.
    Blinking Orange
    Blinking orange light.A firmware upgrade is in progress.
    Off
    Light is off.Device is being factory reset.

On Your Computer

  1. Launch the browser that you use to go online.
    Main Desktop Browsers.
  2. Navigate to http://dlinkap.local and login with the admin password set on your range extender.
    Address bar highlighted in internet browser.
  3. The Status tab will display the status or your range extender.
    D-link DAP-1650 status
  4. The status will show the range extender's connection to the router.

We're here to help!

Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

In This Guide
You'll Learn:
  • How to check the network status of your D-Link Range Extender.
You'll Need:
  • To be by your range extender or have a computer on hand.

You can check the status of your D-Link DAP-1650 AC1200 Range Extender in one of two ways:

  • On the device itself,
  • On a computer.

The type and amount of network related information that you get depends on which method you use.

On Your Range Extender

  1. The indicator lights on the D-Link DAP-1650 AC1200 Wi-Fi range extender have the following meanings:

    D-Link DAP-1650 with indicator lights

    Power LED (1):

    Solid Green
    Solid green light.On and functioning properly.
    Blinking Green
    Blinking green light.WPS has been pushed and searching for signal.
    Solid Orange
    Solid orange light.Device is booting up.
    Blinking Orange
    Blinking orange light.Device is in recovery mode.

    Internet LED (2):

    Solid Green
    Solid green light.Successfully connected.
    Blinking Orange
    Blinking orange light.A firmware upgrade is in progress.
    Off
    Light is off.Device is being factory reset.

On Your Computer

  1. Launch the browser that you use to go online.
    Main Desktop Browsers.
  2. Navigate to http://dlinkap.local and login with the admin password set on your range extender.
    Address bar highlighted in internet browser.
  3. The Status tab will display the status or your range extender.
    D-link DAP-1650 status
  4. The status will show the range extender's connection to the router.
We use cookies on our website to enhance your experience, analyze site usage and support our marketing efforts. To learn more, visit our Privacy Policy. By clicking “Accept”, you agree to our use of cookies and similar technologies.
Accept