Need help?

Chat with a Tech Pro about services & pricing.

Special Offer: All students, parents, & educators get 50% off tech support for the entire school year. Select the Support - Annual plan and enter code “EdTech50” during checkout.

How to Add a Sengled Smart Light Bulb to a Wink Hub

Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.

Introduction

This guide will walk you through how to install a new Sengled smart light and get it added into your existing Wink hub using the Wink app on your mobile device.
Before You Begin:
Setup Your Wink Hub
Before beginning, make sure your Wink hub is setup and working properly first.
Sengled and Wink

1 Install the New Bulb

  1. Turn off the power to the lamp or light fixture where you want the smart light.
    Light switch off.
  2. Remove your old bulb.
  3. Carefully screw in your new Sengled bulb.
    Screw in bulb
  4. Turn your light on.
    Light switch on.

2 Add Sengled Lighting to the Wink App

Grab the mobile device you have the Wink app installed on in order to get your Sengled lights added.

  1. Open Wink, and select Menu on the top left.
    Wink
    Menu
  2. Select Products at the top, then select Add to Wink.
    Wink Menu with Products and Add to Wink highlighted.
  3. Select Lighting.
    Add To Wink with Lighting highlighted.
  4. Select Lights.
    Lighting menu with Lights highlighted.
  5. Scroll down, and select the type of Sengled bulb you have.
    Lights with Sengled bulbs shown
  6. You may be asked to allow Wink access to your location, select Allow.
    Access location request with Allow highlighted.
  7. Follow the instructions in the app to complete adding your Sengled light to your Wink hub.
    Prompt to follow step by step instructions with Next highlighted.

We're here to help!

chat
Connect to a Tech Pro

Call or chat with a Tech Pro 24/7.

This guide will walk you through how to install a new Sengled smart light and get it added into your existing Wink hub using the Wink app on your mobile device.
Before You Begin:
Setup Your Wink Hub
Before beginning, make sure your Wink hub is setup and working properly first.
Sengled and Wink
  1. Turn off the power to the lamp or light fixture where you want the smart light.
    Light switch off.
  2. Remove your old bulb.
  3. Carefully screw in your new Sengled bulb.
    Screw in bulb
  4. Turn your light on.
    Light switch on.

Grab the mobile device you have the Wink app installed on in order to get your Sengled lights added.

  1. Open Wink, and select Menu on the top left.
    Wink
    Menu
  2. Select Products at the top, then select Add to Wink.
    Wink Menu with Products and Add to Wink highlighted.
  3. Select Lighting.
    Add To Wink with Lighting highlighted.
  4. Select Lights.
    Lighting menu with Lights highlighted.
  5. Scroll down, and select the type of Sengled bulb you have.
    Lights with Sengled bulbs shown
  6. You may be asked to allow Wink access to your location, select Allow.
    Access location request with Allow highlighted.
  7. Follow the instructions in the app to complete adding your Sengled light to your Wink hub.
    Prompt to follow step by step instructions with Next highlighted.